Ideal for fabricators wanting to get the competitive edge
Ideal for the budget concerned. This machine features a fully welded sheet metal base (a feature not found on expensive German machines)that two 50mm ground steel rails sit on. This offers superior rigidity . The KD402 uses two 400mm blades and features a Elgo Digital display for the cut length. Two hand safety is provided to the operator as well as full guarding around the blades. A two stage rapid feed option is available for cutting small profiles.
Key Features:
BUILT STRONGER THAN THE GERMAN EQUIVALENT!!!
Ideal for fabricators wanting to get the competitive edge.
KD402 Cutting Capcity
| KD402 | |
|---|---|
| Motor KW | 2.2 KW x 2 |
| Volt/Freq/Amp | 415v (3A+E) /50/15 |
| Blade Diameter / Bore | 400mm x 2 / 30mm |
| Spindle RPM | 3000 RPM |
| Air Consumption | 46 Lt/minute |
| Air Pressure | 6 Bar |
| Air Connector | Nitto Male |
| Table Height (mm) | 900mm |
| Machine Dimensions (mm) (Width x Depth x Height) | 4100 x 1100 x 1460mm |
| Packing Dimensions (cm) (Length x Width x Height) | 430 x 75 x 170cm |
| Net Weight (KG) | 487kg |
| Gross Weight (KG) | 622kg |
